Mercedes-Benz offers Programmable Special Module (PSM), a fully multiplexed electronic system networked to the vehicle CAN bus system, to Sprinter and Metris. PSM is an optional electronic control module that is the only Mercedes-Benz approved analog and digital gateway into the vehicle’s electronic system. PSM provides an interface between the van and auxiliary electronic systems and creates a host of possibilities for vehicle upfit.
PSM is developed specifically to provide customers, upfitters, and fleets a hardware and software access to individual types of CAN bus data for electrical installations and full functional integration of their products. The access to the CAN bus data via PSM allows the customers and upfitters to read specific vehicle information and use the information to control specific vehicle functions. Vehicle information from the CAN bus through PSM can be evaluated and routed onto the body manufacturer CAN bus or onto the PSM multifunction inputs and outputs when upfitting or installing aftermarket electronic equipment. PSM is installed in the left seat base in both Sprinter and Metris, and the fuses for PSM are located in the fuse box on the left seat box frame.
The PSM control unit hardware and software and the corresponding functions differ between the Sprinter and Metris models. Some of the described functions below may only be available on a specific vehicle model type.
Vehicles ordered with the factory option code ED5 come with PSM installed on the vehicle. PSM can also be retrofitted only onto vehicles equipped with PSM prep code, ED8. The side sliding door electric step, the factory option codes T57 or T58, comes with PSM module included.
For more information, please check PSM Bulletin and PSM section on Body Equipment Guideline on Upfitter Portal.
PSM serves as an interface between the vehicle and the electrical upfits. PSM can decrease or eliminate any additional wiring or relay logic due to its straightforward integration into on-board power supply. PSM connects directly to the body CAN and can access vehicle status information and control vehicle functions. In addition, PSM offers up to 10 inputs, both analogue and digital, and 19 outputs available for user-specific components. To avoid any vehicle malfunctions on the electric control units, please never cut into or interfere with the Mercedes-Benz wiring harness (violation of Body Equipment Guidelines).
PSM uses an internal programmable logic controller (PLC), a module with freely programmable logic function blocks that freely interconnect with each other to create any requested signal links. PSM software holds a total of 12 programmable logic controller (PLC) groups, and each PLC group has 8 logic function blocks. A number of vehicle signals are available for PSM, and these signals can be combined together to create function blocks with logic combinations. The signals can connect with other signals using the following sets of logic operators and functions:
PSM signals in coordination with the above functionalities can create a program to improve vehicle usages such as fuel economy and vehicle and passenger safety.
PSM software is supported only by Mercedes Benz authorized personnel. PSM program must be uploaded to the vehicle via a Mercedes Benz diagnostic tool by an authorized Mercedes Benz personnel or dealer or trained Master Upfitter. The modes of operation for PSM differ between Sprinter and Metris. Due to software changes, MY2019 and later Sprinter models will have different PSM software than MY2018 and earlier Sprinter models. Note some PSM functions may only be available on specific vehicle models. Vehicles of the same base software type only can transfer customized PSM software dataset to other vehicles with same base software type. For more questions regarding PSM program, please contact your local dealer. (Dealers and Master Upfitters, please log into Upfitter Portal).
For the PSM programs provided by Mercedes-Benz (Mercedes-Benz USA, LLC , Daimler Vans USA, LLC and Mercedes-Benz Vans, LLC.), I, the upfitter, understand, agree and acknowledge that all the features, functions, and signals provided by the PSM program will be used for modifications that are compliant with all applicable Federal, State and local laws and regulations, as well as the BEG and all other Mercedes-Benz technical bulletins and information found on the Upfitter Portal or otherwise communicated by Mercedes-Benz.
I further understand, agree and acknowledge that Mercedes-Benz does not take responsibility for any issues and problems which relate to or result from Upfitter’s use of the PSM as part of its vehicle modifications or from the features, functions, and signals provided by the PSM related to Upfitter’s modifications which are not compliant with all applicable Federal, State and local laws and regulations, as well as the BEG and all other Mercedes-Benz technical bulletins and information found on the Upfitter Portal or otherwise communicated by Mercedes-Benz. Mercedes Benz, to the fullest extent permitted under the law, disclaims all express and implied warranties related to the Upfitter’s modifications and use of the PSM.